| OZDAT http://www.ozdat.com.au/forum/ |
|
| Electronic dizzy http://www.ozdat.com.au/forum/viewtopic.php?t=34294 |
Page 1 of 1 |
| Author: | adz1600 [ Fri Aug 05, 2016 12:57 am ] |
| Post subject: | Electronic dizzy |
Hi all Just having a look around and seen that the vacuumed advance has been plated up on the dizzy Anyone know why this would be ? |
|
| Author: | xfacta [ Thu Aug 11, 2016 12:54 pm ] |
| Post subject: | Re: Electronic dizzy |
Used to see that particularly for webers and things like that where the vacuum was very "up and down" and the advance would then contribute to the car running lumpy at idle and all sorts of other things. Mostly, if the Dissy is set up correctly, weights, springs, maximum advance and so on then you don't need vac advance. |
|
| Page 1 of 1 | All times are UTC+11:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|