OZDAT http://www.ozdat.com.au/forum/ |
|
Drag link dust boot for a 1600 http://www.ozdat.com.au/forum/viewtopic.php?t=34467 |
Page 1 of 1 |
Author: | waximproved [ Sun Feb 19, 2017 9:43 pm ] |
Post subject: | Drag link dust boot for a 1600 |
I have a 1970 1600. The dust boot covering the ball joint on the end of my drag link has perished. Are replacement dust boots available? I'm not having much luck locating one. I tried with an old ball joint boot, but the base of the boot won't sit over the drag link, so the boot moves around as the ball joint moves. |
Author: | SR20Datsun [ Mon Feb 20, 2017 10:35 am ] |
Post subject: | Re: Drag link dust boot for a 1600 |
Perhaps try Datsport if you haven't already? |
Author: | Nissanman [ Mon Feb 20, 2017 11:31 am ] |
Post subject: | Re: Drag link dust boot for a 1600 |
Try KOK ball joint boots from Repco for example. Their range is as follows: - Sizes available and part numbers are part number: TE1. Small inner diameter: 12mm Large inner diameter: 26mm (small is obviously the top of the boot, large is the bottom) part number: TE2. SID: 12mm LID: 29mm part number: TE3. SID: 16mm LID: 34mm part number: TE4. SID: 14mm LID: 34mm part number: BJ5. SID: 14mm LID: 40mm part number: BJ6. SID: 19mm LID: 40mm part number: TE7. SID: 50mm LID: 64mm part number: TE8 - no sizes given part number: TE9 - no sizes given part number: TE10 - no sizes given https://www.google.com.au/search?q=kok+ ... BFcQsAQIOw |
Page 1 of 1 | All times are UTC+11:00 |
Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |