OZDAT
http://www.ozdat.com.au/forum/

Drag link dust boot for a 1600
http://www.ozdat.com.au/forum/viewtopic.php?t=34467		 Page 1 of 1
Author:  waximproved [ Sun Feb 19, 2017 9:43 pm ]
Post subject:  Drag link dust boot for a 1600
I have a 1970 1600. The dust boot covering the ball joint on the end of my drag link has perished. Are replacement dust boots available?
I'm not having much luck locating one.
I tried with an old ball joint boot, but the base of the boot won't sit over the drag link, so the boot moves around as the ball joint moves.
Author:  SR20Datsun [ Mon Feb 20, 2017 10:35 am ]
Post subject:  Re: Drag link dust boot for a 1600
Perhaps try Datsport if you haven't already?
Author:  Nissanman [ Mon Feb 20, 2017 11:31 am ]
Post subject:  Re: Drag link dust boot for a 1600
Try KOK ball joint boots from Repco for example.
Their range is as follows: -
Sizes available and part numbers are

part number: TE1. Small inner diameter: 12mm Large inner diameter: 26mm (small is obviously the top of the boot, large is the bottom)

part number: TE2. SID: 12mm LID: 29mm

part number: TE3. SID: 16mm LID: 34mm

part number: TE4. SID: 14mm LID: 34mm

part number: BJ5. SID: 14mm LID: 40mm

part number: BJ6. SID: 19mm LID: 40mm

part number: TE7. SID: 50mm LID: 64mm

part number: TE8 - no sizes given

part number: TE9 - no sizes given

part number: TE10 - no sizes given

[ img ]

https://www.google.com.au/search?q=kok+ ... BFcQsAQIOw
Page 1 of 1 All times are UTC+11:00
Powered by phpBB® Forum Software © phpBB Limited
https://www.phpbb.com/