OZDAT http://www.ozdat.com.au/forum/ |
|
fj20 dizzy delete http://www.ozdat.com.au/forum/viewtopic.php?t=34740 |
Page 1 of 1 |
Author: | leadrun [ Wed May 16, 2018 9:03 am ] |
Post subject: | fj20 dizzy delete |
Hey guys Just got my hands on my very first 510 with a fj20 already fitted. Want to give it a bit of a upgrade with a microtech and new coils, injectors etc.. What have people done with the old dizzy cap? Do they stay or does somebody make a blanking cap of some sorts? Please bare with me as this is my first time down this track...i have years of experience with the later model nissans but have always wanted to own a clean 1600. Cheers for your help. |
Author: | green200b [ Wed May 16, 2018 12:20 pm ] |
Post subject: | Re: fj20 dizzy delete |
Firstly, I would suggest that you get something better than a Microtech if you're going to this much effort. There are better options for close to or only slightly more than the cost of a new Microtech. With the dizzy, when I was running my FJ20 I used the FJ20 dizzy body with E15 turbo Pulsar dizzy internals as a crank angle sensor. This was running a dizzy-controlled spark setup though. Do you have another solution for the crank angle sensor? |
Author: | Bozo510 [ Wed May 16, 2018 5:32 pm ] |
Post subject: | Re: fj20 dizzy delete |
You are always one stepping with the creativity Graeme. |
Author: | leadrun [ Thu May 17, 2018 9:00 am ] |
Post subject: | Re: fj20 dizzy delete |
That is a brilliant idea with the measuring cups! Il look into that for sure. As for the CAS i was lead to believe it was a simple "wire in" running the 4X ignitor that the microtech offers? I have emailed micrtech directly and they have assured me this is all i need. Thanks for all your help, |
Page 1 of 1 | All times are UTC+11:00 |
Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |