OZDAT http://www.ozdat.com.au/forum/ |
|
water intercooler sizes for rad sizes..... http://www.ozdat.com.au/forum/viewtopic.php?t=5588 |
Page 1 of 1 |
Author: | Graham [ Sat Jul 02, 2005 1:46 pm ] |
Post subject: | water intercooler sizes for rad sizes..... |
after taking my car to get the intercooler done the mech didnt put my choosen water rad in because he said it was to big....ie it had to much volume. i thought that it was a good size. details as follows out side L 3700mm H 200mm W 70mm it holds approx 1.4 litres i dont know how much water the rs liberty w/a intercooler holds+the water lines. i would of thought it would be great. ps its a denso air to air intercooler that i would like to use as the water rad. i am only assuming that it would just be suitable to use. |
Author: | Dave [ Sat Jul 02, 2005 5:08 pm ] |
Post subject: | |
Your mechanic probably thought that at just over 3 1/2 metres wide, it would hang out into traffic in other lanes Seriously though, I am about to get a Subaru unit. I was going to design my own setup but a few people recommended these. There are currently three going on the rsliberty forums, from $200 up to $250 for the complete setup (radiator, intercooler, pump, piping, brackets ). I reckon $200 is pretty cheap, even if I do decide to buid my own down the track sometime. Besides, I've got enough to do without overly complicating things. |
Author: | Dave [ Sat Jul 02, 2005 5:18 pm ] |
Post subject: | |
PS If you're interested, I'll post the sizes of the various bits when they arrive (hopefully by the end of next week) |
Author: | Graham [ Sat Jul 02, 2005 6:07 pm ] |
Post subject: | |
that would be great......i allready have the cooler plumbed up....just need to fix the rad..... oops too many 000 graham |
Author: | bob260 [ Sat Jul 02, 2005 6:22 pm ] |
Post subject: | |
Did he say what he thought the negative effects of too much volume is? I cant think of any negative effects off the top of my head. |
Author: | Graham [ Sat Jul 02, 2005 6:41 pm ] |
Post subject: | |
no he didnt...i am starting to think that he just didnt want to fit it. i can only think that because it is a air/air cooler he didnt think it would work. the denso intercooler is like a aircon condensor. has two tubes down the ends and fins running side to side. if anthing i could always put a tank in the lines with smoe ice in it........i have thought about gettnig a container within a container so ice wouldnt melt to fast. just to cool the water not add to the water if you know what imean, graham |
Page 1 of 1 | All times are UTC+11:00 |
Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |