I have a datto 1200 ute, i want to fit an A14 engine, but i dont know what car the A14 came from, im 99% sure the A14 bolts right into the 1200 without any mods is this true?

If you know can you say the year/make/model of the car
Im in adelaide i want to look around the wrecker yards there may be some of them floating around i can get cheap

_________________
repn the blood orange 1200 ute

this site will give you a little bit of an idea where it originated.
http://www.datsunworld.com/altnames.htm

_________________
- 1972 Datsun 1600 S15 SR20DET

A14 comes in later model sunnys and N10 pulsars (in east-west guise).

fwiw, the A15 is found in nissan/datsun vanettes.

you'll need to make a small spacer plate out of 6.0mm+plate and use the A12 engine mounts on the A14 block. the early side dizzy A12 mounts are a little further rearward than the 120Y A12 mounts - which is the same as the A14/A15 mounts.

once the engine is in place, you'll see exactly what i mean.

all you need is a drill, a hack saw and the plate and you'll be set.

good luck.

_________________
frankenstein projects R us.

The Republic of Western Australia -
Propping up the Nation's Economy since 1901.

hey dude,
ive just put an a14 in my 81 ute.
it went in no probs whatsoever.
the hardest bit is lifting the sucker into the engine bay.
had to do absoloutly no mods, with the exception of the exhaust.
she goes like stink now.
good luck