OZDAT http://www.ozdat.com.au/forum/ |
|
Most suitable cam http://www.ozdat.com.au/forum/viewtopic.php?t=7147 |
Page 1 of 1 |
Author: | L18_B310 [ Thu Feb 02, 2006 6:29 pm ] |
Post subject: | Most suitable cam |
Gday, im trying to find out which cam would be most suited to the mods im doing to my L18. The mods are: Head: New valve guides and seats, standard 42mm intake and 35mm exhaust valves, match extend port to 35mm intake ports (same as manifold.) Carbs: Twin 45mm webers, 34mm chokes. Block: Standard bottom end, block had been decked, new rings & bearings. From the information I have there, what would be the most suitable cam for my engine specs. |
Author: | thehelix112 [ Thu Feb 02, 2006 6:49 pm ] |
Post subject: | |
34mm chokes, I would GUESS (blindly) thats maybe a 70 or 72 works cam would be decent? Dave |
Author: | jdmdatsun510 [ Thu Feb 02, 2006 6:55 pm ] | |
Post subject: | ||
34mm chokes, I would GUESS (blindly) thats maybe a 70 or 72 works cam would be decent?
I'd say a 72 works cam for sure.Dave I ran a 72 works with twin 44mm SU's with great results. |
Author: | thehelix112 [ Thu Feb 02, 2006 7:01 pm ] |
Post subject: | |
Yeah but 34mm chokes. Dave |
Author: | L18_B310 [ Thu Feb 02, 2006 8:44 pm ] |
Post subject: | |
what is the power range of a 72 degree cam? And who makes decent ones? |
Author: | Angle [ Thu Feb 02, 2006 10:01 pm ] | |
Post subject: | ||
Yeah but 34mm chokes.
4x34 >> 2x44 ...
Dave |
Author: | jdmdatsun510 [ Fri Feb 03, 2006 12:35 am ] | ||
Post subject: | |||
Yeah but 34mm chokes.
4x34 >> 2x44 ...Dave So 34mm chokes would be more than ample. Not the best but ample. Atleast they are 45DCOE's and not 40DCOE's. Wade make a 72 works copy. Which is what I have used. I should add, I got good results with the 72 and the 44mm SU's with significant porting done to the inlets. |
Author: | 1600dave [ Fri Feb 03, 2006 12:40 am ] |
Post subject: | |
Wade #487 is the works 72 cam. picked mine up with lash pads for 50 bux from a swap meet! |
Author: | jdmdatsun510 [ Sat Feb 04, 2006 9:02 am ] | |
Post subject: | ||
Wade #487 is the works 72 cam. picked mine up with lash pads for 50 bux from a swap meet!
BARGAIN !!!!!!
|
Page 1 of 1 | All times are UTC+11:00 |
Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |