OZDAT http://www.ozdat.com.au/forum/ |
|
Bluebird struts, Datsport discs + adaptors (problem solved!) http://www.ozdat.com.au/forum/viewtopic.php?t=8069 |
Page 2 of 2 |
Author: | Damo666 [ Mon Jan 08, 2007 11:06 am ] |
Post subject: | |
Sorry, just stumbled across this thread late - from reading the above posts I am assuming that using the 280ZX steering arms would also bolt up to an otherwise stock Bluebird, and would still give the increase in camber? (using the corect shear/spacer rings) Are the ZX arms any shorter than the Buey ones at all? Does it help/decrease the 4.1 turns from lock-to-lock as well? |
Author: | simboo [ Tue Jan 09, 2007 11:13 am ] | ||
Post subject: | |||
Are the ZX arms any shorter than the Buey ones at all? Does it help/decrease the 4.1 turns from lock-to-lock as well?
They are about the same length, but have a different ball joint angle, more inner offset of the ball joint, and a different shaped cure in the arm where the tie rods connect which is easily adjusted. I havent noticed a decrease in lock to lock.
Just a photo of the Car!!!
CamberOld R31 brakes New S15's |
Author: | Dave [ Wed Mar 07, 2007 10:41 pm ] |
Post subject: | |
Might be a better idea to start a new thread |
Author: | SR20Datsun [ Thu Mar 08, 2007 8:25 am ] |
Post subject: | |
sort of off topic, but is that VHT caliper paint? Looks bloody nice! |
Author: | bortho [ Sun Oct 27, 2013 11:55 am ] |
Post subject: | Re: Bluebird struts, Datsport discs + adaptors (problem solv |
Hi mate, Did you have to grind a small part of the caliper to make room for the datsport caliper dog bone mounting brackets? I'm trying to fit mine up but the bracket is fouling with the caliper If you could guide me in the right direction that would be great Ian |
Author: | sutho510 [ Sun Oct 27, 2013 1:47 pm ] | |
Post subject: | Re: Bluebird struts, Datsport discs + adaptors (problem solv | |
Hi mate,
I done the conversion on my 1600 and had to trim the caliper and the r31 strut were the bracket bolts up
Did you have to grind a small part of the caliper to make room for the datsport caliper dog bone mounting brackets? I'm trying to fit mine up but the bracket is fouling with the caliper If you could guide me in the right direction that would be great Ian |
Author: | bortho [ Mon Oct 28, 2013 8:31 pm ] |
Post subject: | Re: Bluebird struts, Datsport discs + adaptors (problem solv |
Thanks mate, i also spoke with Baz from datsport and got a die grinder and sorted them out. They fit nicely now. My car is a trx so disc on the rear, do you know how the brake master cylinder will be with the r32 calipers up front? Will it be sufficient do you know? |
Author: | sutho510 [ Mon Oct 28, 2013 9:14 pm ] |
Post subject: | Re: Bluebird struts, Datsport discs + adaptors (problem solv |
I run a small can 180b booster and a 7/8th master and still have drums on the back and it pulls up very well |
Page 2 of 2 | All times are UTC+11:00 |
Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |