OZDAT http://www.ozdat.com.au/forum/ |
|
Dyno Results of your ride! http://www.ozdat.com.au/forum/viewtopic.php?t=8663 |
Page 4 of 8 |
Author: | gun16 [ Fri Nov 09, 2007 2:20 pm ] |
Post subject: | |
1971 Datsun 1600 GUN16 S13 Sr20det Gt2871r 52 trim Nismo 555cc injectors Z32 AFM PLMS ECU retune 219rwkw(295) @ 16psi |
Author: | RallyP510 [ Sun Nov 11, 2007 12:31 pm ] |
Post subject: | |
See if this works... |
Author: | RallyP510 [ Sun Nov 11, 2007 12:33 pm ] |
Post subject: | |
And with a slightly different cam profile... |
Author: | bluerat [ Sun Nov 11, 2007 1:37 pm ] |
Post subject: | |
Thats a fantastic curve, Its still making power at 9000rpm!! Does gearing have any major effect on the final figure? eg would running a 4.6 diff give you a different figure than a 3.7?? What fuel do you run, not avgas being a rally car?? |
Author: | chris1616 [ Mon Nov 12, 2007 3:32 pm ] |
Post subject: | |
Thats an awesome result! well done! Slightly more than my 55.5rwkw |
Author: | Aym23q [ Tue Nov 13, 2007 6:00 pm ] |
Post subject: | |
nice power, what motor what mods? |
Author: | munyard [ Tue Nov 13, 2007 9:50 pm ] | ||
Post subject: | |||
Does gearing have any major effect on the final figure? eg would running a 4.6 diff give you a different figure than a 3.7??
its got a 5.1 diff which has the most frictional losses of them all, aside from losses it shouldnt make any difference what diff ratio, or gear you are in as torque and speed just trade to the same power number.What fuel do you run, not avgas being a rally car?? i reckon the reality is likely to be very different, and cos of the many variables i dont have a lot of faith in most chassis dynos. its on 98 pump feul.
what motor what mods?
its a normal 2L bottom end in an L18 block, flash rods and pistons..but the head is not very normal, ive welded lots of it solid and milled out new giude bores to put the valves in a different position etc. it ends up flowing nearly as well as an SR or FJ head, so the potential for power is similar. |
Author: | dnsv1600 [ Wed Nov 14, 2007 1:47 pm ] |
Post subject: | |
Which head do you use A87? Here goes FJ20e mild rebuild. bored 20 thou Std pistons with 20 overbored rings Std Rods and Crank with full balanceing including clutch Head std although I think my head guy did something but won't tell me. Std Cams apprenatly Std injectors 220cc I think? Std ecu no piggy backs Std air filter and MAF 77rwkw @ Hyperdrive - powerrun 72rwkw @ Extreme Ford Turning - Nispro National Dyno Day - Trophey for highest 4cyl NA real lumpy power curve. New recent mods; removed Std ecu & std air filter and MAF MicroTech LT8 & pod filter and tuned properly 88rwkw @ Hyperdrive - 12 run Dynotune Nice smooth power curve. new mods planned; T3 Turbo on std manifold FMIC & n13 radiator with twin thermos 510cc injectors 3" exhaust |
Author: | DRracing [ Wed Nov 14, 2007 9:37 pm ] |
Post subject: | |
OK, DR30 RSX Skyline. FJ20 with forgies, hottie cams, 550 RX7 squirters, hybrid FMIC, GT30 on standard manifold, wolf 3dv4 with multi coils. 355rwhp@19psi-335rwhp@16psion BP ultimate Will scan and post up dyno sheet when I get back home. |
Author: | nick [ Thu Nov 15, 2007 2:30 am ] |
Post subject: | |
Vaughan, do you know the specs on the cams? and what broke exactly (noticed your signature)... |
Author: | Aym23q [ Thu Nov 15, 2007 7:11 pm ] | ||
Post subject: | |||
what motor what mods?
its a normal 2L bottom end in an L18 block, flash rods and pistons..but the head is not very normal, ive welded lots of it solid and milled out new giude bores to put the valves in a different position etc. it ends up flowing nearly as well as an SR or FJ head, so the potential for power is similar. |
Author: | DRracing [ Thu Nov 15, 2007 8:28 pm ] |
Post subject: | |
Not sure on cams but will post up when I edit post with dyno sheet. As for what is broken not sure yet but I'm thinking it's spun a bearing, will be removing sump and having a looky to see if I can see anything when I'm back in Perth in a cupla weeks. |
Author: | fj20_180b_nz [ Fri Nov 16, 2007 12:26 pm ] | |
Post subject: | ||
Here goes FJ20e mild rebuild. ... 77rwkw @ Hyperdrive - powerrun 72rwkw @ Extreme Ford Turning - Nispro National Dyno Day - Trophey for highest 4cyl NA ... I got 75rwkw out of my na fj, bored, forged flattops and mild cams, everything else the same as yours, then afterwards I found the exhaust cam was a tooth out haven't put it back on the dyno yet... |
Author: | dnsv1600 [ Fri Nov 16, 2007 5:41 pm ] |
Post subject: | |
I don't understand how ppl have flattop pistons in a FJ as there are 10mm crowned with valve reliefs and flat tops would lower the compresion. 77 to 72rwkw that could just be a differance between dynos there was no tuning changes made to mine and I lost 5kw. Would be interested in seening the new dyno with only changing the cam tooth????????? |
Author: | datto-510 [ Fri Nov 16, 2007 6:48 pm ] | |
Post subject: | ||
I don't understand how ppl have flattop pistons in a FJ as there are 10mm crowned with valve reliefs and flat tops would lower the compresion. different piston height ? or shaved head / smaller valve chambers ? (yeah i'm making this up as i got along, but it sounds good right ?)
|
Page 4 of 8 | All times are UTC+11:00 |
Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |