OZDAT
http://www.ozdat.com.au/forum/

Dyno Results of your ride!
http://www.ozdat.com.au/forum/viewtopic.php?t=8663		 Page 7 of 8
Author:  trb012 [ Tue Feb 16, 2010 12:13 pm ]
Post subject:  Re: Dyno Results of your ride!
MYDATO wrote:
1969 Datsun 1600
CA18DET
85.5mm CP Forged Pistons
NDC race bearings
Shot Peend Rods
ARP rod bolts
New stock mains bolts
ACL MLS head gasket
Ports cleaned up
Stock cams
Inlet butterflies removed
Stock FPR
460cc GTIR injectors
Z32 MAF
Apexi Super AVC-R
Stock exhaust manifold
Exhaust mandrel stainless system 2.5' to cat 3' from cat to xforce muffler 4.5 tip
Garrett GT2560R
Nistune with LM2 wideband

185rwkw @ 16 PSI with no air correction

Coming soon GT2871 with 700cc injectors and poncams with adjustable cam gears. Hoping for approx 250rwkw :twisted:

Hmmm interesting wana sell your old turbo when the time comes mate? Could be just what I need for the z :twisted:
Author:  trb012 [ Tue Feb 16, 2010 1:01 pm ]
Post subject:  Re: Dyno Results of your ride!
1976 Datsun 120y
Z18ET
ACL Forged Pistons
ACL race bearings
L18 Counter Balanced crank
Shot Peend L20 Rods
ARP rod bolts
ACL head gasket
Head slighly ported
Wade 7881 cam
Inlet manifold egr tube removed with adaptor plate
Gas research 400cfm throttle body
Gas research B2 converter boost referenced
S2 Bluebird dizzy regrafed and boost retard fitted
Stock exhaust manifold
T28/T3 hybrid turbo

So far has made 141kw atw on 12psi soon to replace restrictive exhaust manifold and exhaust as well as upgrade to a gt series turbo and aim for 170kw :twisted:
Author:  TD.711 [ Sat Mar 27, 2010 5:38 pm ]
Post subject:  Re: Dyno Results of your ride!
1972 Datsun 1600 sedan
S13 SR20DET
Gt2860rs (disco potato)
Sard 550cc injectors
3 inch exhaust, cat, resinator, muffler
450 x 300x 76 just jap cooler
Haltech e6k engine management

213.7kw or 286.1hp @ 18psi
Author:  datmad1968 [ Sun May 09, 2010 11:23 pm ]
Post subject:  Re: Dyno Results of your ride!
Not totally sure of all the specs but,
L20
very worked head
big cam
twin 40mm webers
2.5 inch pipe, dead straight from pacemakers to rear muffler

made 89kw atw
Author:  mcgee [ Fri Jun 18, 2010 2:46 pm ]
Post subject:  Re: Dyno Results of your ride!
Datsun 1200 coupe
CA18DET
GT2540 aka 2876r
Siemans 660cc injectors
3 inch exhaust
Microtech LT-10s + X4

331rwhp @ 22psi (248rwKW) BP Ultimate

Soon to be re-tuned on E85 with/without restrictor for Improved Production racing.
Author:  Tyrie [ Fri Jun 18, 2010 2:51 pm ]
Post subject:  Re: Dyno Results of your ride!
will 660cc injectors be enough for e85?
Author:  da75in [ Fri Jun 18, 2010 3:13 pm ]
Post subject:  Re: Dyno Results of your ride!
Datsun 1600
Fj20 turbo
Gt30 Turbo
Forged pistons
Autronic with cdi
3" exhaust
365rwhp at 15psi
Author:  BM510 [ Sat Jun 19, 2010 7:29 am ]
Post subject:  Re: Dyno Results of your ride!
da75in wrote:
Datsun 1600
Fj20 turbo
Gt30 Turbo
Forged pistons
Autronic with cdi
3" exhaust
365rwhp at 15psi
sweet :thumbsup:
Author:  datman55 [ Sat Jun 19, 2010 3:01 pm ]
Post subject:  Re: Dyno Results of your ride!
Tyrie wrote:
will 660cc injectors be enough for e85?
Depends on how much power you plan to make.

I went from 550cc Sard's to 740cc Nismos when I changed to E85. This combo has made 400rwhp from the SR.

Hope that helps.
Author:  BM510 [ Fri Nov 05, 2010 9:00 pm ]
Post subject:  Re: Dyno Results of your ride!
Datsun 1600
13bt
GT40 turbo
Standard series 4 engine
257rwhp on 9psi
Author:  SR20Datsun [ Fri Nov 05, 2010 9:38 pm ]
Post subject:  Re: Dyno Results of your ride!
Pics or it didn't happen (not of the dyno read out.... the car man!!)
Author:  BM510 [ Fri Nov 05, 2010 9:46 pm ]
Post subject:  Re: Dyno Results of your ride!
SR20Datsun wrote:
Pics or it didn't happen (not of the dyno read out.... the car :thumbsup: man!!)
Only been off the road for 4 years. Couple of things to finnish off then its the road
Author:  coops7788 [ Mon Nov 08, 2010 8:41 pm ]
Post subject:  Re: Dyno Results of your ride!
BM510 wrote:
Datsun 1600
13bt
GT40 turbo
Standard series 4 engine
257rwhp on 9psi

http://www.youtube.com/watch?v=mgy9wJfT9xA

:thumbsup:
Author:  SR20Datsun [ Wed Nov 10, 2010 8:07 pm ]
Post subject:  Re: Dyno Results of your ride!
Nice! It's going to be nice to have another Datto (and a 1600) in melbourne!
Author:  Scando [ Fri Nov 12, 2010 11:01 am ]
Post subject:  Re: Dyno Results of your ride!
L28ET
GT3540R
Haltech Sports 2000
266rwkw@21psi

Attachments:
Dyno printout.pdf [104.77 KiB]
Downloaded 286 times
Page 7 of 8 All times are UTC+11:00
Powered by phpBB® Forum Software © phpBB Limited
https://www.phpbb.com/